Steps to Set Up Hams Over IP

1. Obtain a Supported Device or Softphone

• You can use a hardware SIP phone (like Cisco SPA series), a softphone app (such as MicroSIP for Windows or GroundWire for mobile), or any compatible SIP client.

2. Request an Extension

• Visit the Hams Over IP website and log into their ticketing system.  https://hamsoverip.com/

• Submit a request for a new extension, following the prompts to provide your name, callsign, and device information as needed.

3. Wait for Credentials

• After submitting your request, you will receive an email with your assigned extension number and SIP credentials (username, password, SIP server address).

4. Configure Your Device or Softphone

• Open your SIP phone’s web interface or your softphone app.

• Enter the following information:

  • SIP Username: Your assigned extension

  • Password: The password provided

  • SIP Server/Proxy: The server address (e.g., pbx.hamsoverip.com or as specified in your welcome email)

  • Port: Typically 5160, unless otherwise specified

  • Display Name: Your callsign or name (optional)

• Save and apply the settings.

5. Reboot and Test

• Reboot your device or restart your softphone app.

• Once connected, your device should register with the network. The indicator light or status should turn green or show “Registered”.

• Make a test call to verify functionality.

6. Troubleshooting and Support

• If you have issues (e.g., orange indicator light), check your IP address and ensure it matches what you submitted. If your IP changes, update the admins via the ticketing system or use a Dynamic DNS service.

• For further help, consult the Hams Over IP Wiki or join their Discord for community support.

Summary Table: Hams Over IP Setup Steps

Setting up Hams Over IP is straightforward: request access, configure your device with the provided credentials, and you’re ready to communicate with other amateur radio operators via the VOIP network.